linkedin

Wencon UW Coating

Wencon UW (underwater)  Coating is a two-component product, to be applied on wet surfaces or underwater. The UW Coating is ideal for the repair of ballast- and cooling pipes where dewpoint can be an issue. A pipe repair using Wencon UW Coating combined with interchanging layers of Wencon reinforcement tape. Excellent for repair jobs which, due to high humidity, have to be done in wet conditions.

Typical applications are coatings of steel surfaces rebuilt with Wencon UW Cream, and coatings underwater – like ships hulls, and/or other submerged structures, tanks, pipes, etc. Examples of repairs under extreme conditions could be On-site repair of sea-water filter housings, where it is not possible to achieve a dry surface and coating of scratched painting on hulls in splash-zones and underwater.

  • Can be applied on wet surfaces or underwater
  • Cures underwater and on wet surfaces
  • Efficient double coat system
  • Long pot-life underwater
  • Strong adhesion to all metal and GRE surfaces

 

View Safety Data Sheet
Instructions for use
Download Product Information (.PDF)

Key technical data

Max temperature+60- +160°C (140 - 320° F)
Consistency fluid
Mixing ratio vol. 1:2
Apply with spatula/brush
Potlife at 20°C25-35 min. mixed in small amounts
Curing time10-18 hours
Machineabilityyes
Specific volume535 cm3 / kg
Dielectric strength10 KV/mm
Product numberProduct nameIMPA no.ISSA no.
No. 1035Wencon UW Coating orange, 0,5 kg (1,1lb) unit 81233675.553.92
No. 1036Wencon UW Coating brown, 0,5 kg (1,1lb) unit812327N/A

    WANT TO HEAR MORE ABOUT OUR SERVICE?

    Call us directly +45 6481 1010 or send an email to: wencon@wencon.com